QUESTIONS? Get them answered or request a quote at (239) 243-7852.
Epoxy vinyl flake is a highly-durable coating most commonly used for garage and industrial applications. After prep steps (patching of cracks and concrete grinding), there are three layers to the system. The first is an opaque epoxy base. Secondly, vinyl chips are broadcast into the system for either a full or partial coverage of the first layer, depending on the client's chosen look. Finally, a scratch-resistant clear epoxy is poured on top for durability.
Highly durable: Epoxy Vinyl Flake is a highly-durable coating which can be parked on and driven on.
Low-maintenance: Because of its UV stability, Deck Flecks is the lowest-maintenance surface on the market. Deck Flecks does not need routine maintenance or seals -- we call it our "set it and forget it" surface. Cleanings can be done with a powerwasher.
Virtually crack-proof: Flecks will stretch to 155% of its length before cracking. Flecks has the industry's only five-year crack-proof warranty.
Beautiful: Flecks is a high-end look that can be installed seamlessly to fit the custom size of your project.
Chlorine stable: Unlike most soft surfaces, Flecks can withstand chlorine splashes from the pool and can be bleached for cleaning.
Safe: Non-slip and impact absorbing, greatly reducing chance of injury.
People-friendly: Cool-to-the-touch and with a slight "give" underfoot, Flecks is extremely comfortable to walk upon.
Easily repaired: The product's granule features a "close knit" -- making spot repairs virtually unnoticeable.
Water-porous or waterproof: As a water-porous system, Flecks can be installed overtop of drains without interrupting water flow, giving you a seamless installation that hides unsightly drains. Flecks can be grouted for a waterproof installation instead.
Garages, auto showrooms, warehouses, industrial spaces.
Deck Flecks is installed at a 3/8-inch thickness. Deck Flecks can be installed over concrete, wood, asphalt, stone, metal, crushed stone, crushed stone aggregate, and fiberglass. The product includes a polyurethane primer, thermoplastic rubber granular, and two-component aliphatic polyurethane binder.
Click below to download tech specs and safety data sheets.
Deck Flecks Specifications
Safety Data Sheets
Standard Coefficient of Friction
Your Deck Flecks can be cleaned with a high pressure power washer of 3,000 psi or less. For mold or mildew, use a 50% bleach/water solution, scrub, and allow to penetrate for five to twenty minutes, and thoroughly rinse. Surface dirt can be removed with a household degreaser such as Simple Green.
The surface is difficult to stain, but oil will stain it. Make sure to thoroughly rinse out any spilled oil. Please take care to keep potted plants in elevated containers, as the combination of organic material, water, and covered surface tends to create a haven for mld or mildew and can stain the surface over time.
Hard water will leave water marks on everything it comes into contact with, including: stucco, cement, windows, painted surface, and decorative stones. We strongly recommend that your sprinklers be directed away from your surface so that no water sprays on the surface. Rain water has no negative effect on Flecks. Water stains can be removed with white household vinegar. Wet the surface, mist with straight vinegar, and hose off. Repeat as needed.
Epoxy vinyl flake floors are warranteed for five years against delamination (surface peeling).